Home » Heat Pump » American Standard Heat Pump Prices, Reviews and Buying Guide

Buying Guide :

Dual Fuel Heat Pump Reviews, Prices and Buying Guide

Dual Fuel Heat Pump Reviews, Prices and Buying Guide

In the Zone 5 and Zone 6 areas, the winter can get very cold. This is...
Payne Heat Pump Costs, Reviews and Buying Guide

Payne Heat Pump Costs, Reviews and Buying Guide

Several manufacturers produce heat pump in various categories. You will find brands which focus on high...
Ruud Heat Pump Cost, Reviews & Buying Guide

Ruud Heat Pump Cost, Reviews & Buying Guide

If you are looking for more affordable heat pump unit with higher than average quality, you...
Coleman Heat Pump Prices, Reviews and Buying Guide

Coleman Heat Pump Prices, Reviews and Buying Guide

You can choose several brands of heat pump from prominent manufacturers. One of them is Coleman...
Heil Heat Pump Features, Reviews, and Prices (by Models and Sizes)

Heil Heat Pump Features, Reviews, and Prices (by Models and Sizes)

Many homeowners would consider heat pump as worthy investment. This equipment has been proven to be...
Geothermal Heat Pump Costs, Reviews and Buying Guide

Geothermal Heat Pump Costs, Reviews and Buying Guide

Nowadays, technology is increasingly developing and making human life more advanced which is marked by the...
Heat Pump Outside Unit Not Running ?

Heat Pump Outside Unit Not Running ?

Nowadays, with advances in technology, human life is made easier by tools that can help us...
Lennox Heat Pump Prices, Reviews and Buying Guide

Lennox Heat Pump Prices, Reviews and Buying Guide

In terms of equipment used for improvement of indoor comfort, Lennox is one of the best...
York Heat Pump Prices, Reviews and Buying Guide

York Heat Pump Prices, Reviews and Buying Guide

Still hesitant to install a York heat pump at home? Get to know more about the...
Bryant Heat Pump Prices, Reviews and Buying Guide

Bryant Heat Pump Prices, Reviews and Buying Guide

Bryant Heat pump is a device used to distribute air at a certain temperature in a...
Rheem Heat Pump Prices, Reviews and Buying Guide

Rheem Heat Pump Prices, Reviews and Buying Guide

Are you looking for rheem heat pump, prices, reviews at the moment? Given the popularity of...
Best Heat Pump Brands & Models Reviews

Best Heat Pump Brands & Models Reviews

It won’t matter if you use any of the top heat pump brands available on the...
Amana Heat Pump Prices, Reviews and Buying Guide

Amana Heat Pump Prices, Reviews and Buying Guide

Getting the best heat pump for your personal use at home cannot be considered as something...
Goodman Heat Pump Prices, Reviews and Buying Guide

Goodman Heat Pump Prices, Reviews and Buying Guide

Goodman has been considered as one of the best brands that you can get if you...
Carrier Heat Pump Prices, Reviews and Buying Guide

Carrier Heat Pump Prices, Reviews and Buying Guide

If you are getting used to the heat pump in your house, then you will surely...
Trane Heat Pump Prices, Reviews and Buying Guide

Trane Heat Pump Prices, Reviews and Buying Guide

Many of you might be using the heat pump in your house. Unfortunately, there are not...
Some of the Best Models of Bryant Heat Pumps

Some of the Best Models of Bryant Heat Pumps

Many people nowadays are looking for the best heat pump that they can use for their...

American Standard Heat Pump Prices, Reviews and Buying Guide

In 2007, American Standard changed to Trane in order that the company can best reflect its most popular brand at the time. In 2008, the company eventually operated under Ingersoll Rand, which then sells products in both brands.

Their air conditioner units can be used in any climates, hot or cold, and their compressor can function as heat pump as well. Their purchase cost is relatively low, making it one of the most competitive manufacturers out there on the market

Additionally, generic parts can be used in their units, making them easier to repair when required. Installation charges may be higher, though, as the compressors are a bit unreliable and prone to malfunction especially when used in extreme conditions. This is where this piece comes in handy. American Standard heat pump, prices, reviews can help you decide whether or not you should buy the unit.

American Standard Heat Pump Features, Pros And Cons

The kind of capacity compressor variable technology used in American Standard units is AccuComfort. Most compressors work with one stage 100-% or 2 stages (70-% and 100%), but two American Standard models Platinum 18 & Platinum 20 work with 750 stages at a capacity range of 25%-100%. This means that in .1% increments, their compressor modulates temperature up & down in order that they can operate at a capacity exactly as needed in accordance with indoor & outdoor conditions.

HVAC technicians marks American Standard’s proprietary compressor duration highly for its performance and durability. Specifically Silver 16 Low model, on the other hand, is excellent in that it has a compact design, suitable for installation in limited space such as under decks.

Nexia can be used to integrate all smart home devices within just a single mobile app. Nexia app works well with American Standard AccuLink thermostat control and controls the Platinum heat pumps. Nexia can also connect with Alexa.

The AccuLink thermostat features a touchscreen unit with Wi-Fi connections. American Standard thrives to provide users with products that are affordable and cost-efficient. They are sold in low purchase costs and are eligible for tax rebates.

The customer service is really good in helping users. Generic parts can be used in the event that the unit requires repair and they fit the unit just as fine. Its highly efficient operation comes with an added value of being quiet. Customers can choose from a wide array of options, provided in a variety of factors such as silent operation, sleek design, and cost efficiency.

The Duration compressor might be very good in its operation. However, repair can take too long should it fail because it is a proprietary piece. Had American Standard featured more generic and universal compressor such as Copeland Scroll, users wouldn’t have a hard time dealing with replacement.

The AccuLink technology is also proprietary in nature. The purpose of using this technology is clearly to help connect all components and eventually to improve power efficiency and comfort. However, it can lead to mechanic issue. Its installation costs are also high, making it a problem for those looking for a budget option. In terms of efficiency, there are other brands out there on the market that are more efficient, making people think twice before purchasing an American Standard unit.

Their units are offered with so-so warranty period and even that is available without coverage for labor. The compressor, while good, is not too reliable and is low in its durability. This will counteract the positive side of purchasing the unit with low initial purchase costs in the end. There are reports from customers that numerous problems during normal operation can occur from time to time.

This is reportedly caused by the fact that wholesalers didn’t install the units in a professional manner. Lastly, with compressors that work in two stages of operation, cooling the room might take longer in the process, which can result in higher utility bills.

Trane Heat Pump VS American Standard Differences

This is perhaps the most frequently asked question. Customers often question about whether to buy an American Standard unit or a Trane one. This matter can be solved easily by looking back at the manufacturer’s past. Since the merging of American Standard and Trane, operating under one parent company, customers can choose to buy either.

For a lot of models, the two are 99% similar with one another. The only difference here, however, is that Trane offers exclusive models in highest-end category. The prime example is XV20i, which comes with an SEER that is really high and features that are cutting-edge.

The American Standard, on the other hand, seems to focus more giving customers an alternative that is closer to the mid-low range that offers great affordability. If it is not looking to buy something that is of high-end range, most models of either brand would suffice as there really is no significant difference separating one from the other.

American Standard Heat Pump Model’s Recommendation

The way American Standard names its products is very friendly to users. What this represents is the fact that potential users can easily figure out what each model carries to offer to its user. A unit can bear the prefixes Platinum, Gold, or Silver, signifying the series it is categorized into while the number that follows shows the SEER rating of it. This makes the model Platinum 18 a Platinum unit with an SEER of 18.

The model Platinum 20 is the brand’s most expensive unit, counting installation costs. But that high price tag comes with an all-round feature that makes it the most efficient.

The Platinum 13, on the other hand, is the least efficient with an SEER of just 13. All American Standard units are certified for Energy Star. This means that the units are all approved by the government for their efficiency in using energy.

The Silver XI heat pump is one of the cheapest American Standard’s units. It is offered in a capacity range of 1.5 to 5 ton. Different tons feature different process. The SEER rating of this series is marked at 14 while its HSPF rating is of 9.2. It is also rated for Energy Star for its ability to provide maximum comfort and efficiency.

The Platinum 16 model comes with a 2 stage heating system, resulting in maximum comfort for users. Similar to other units manufactured by American Standard, these models also performs without noise, making it a perfect addition to a home.

If you are looking to buy a unit with great affordability, this one is a great option to choose. It has an SEER of 19 and an HSPF rating of 9.2. As such, it is quite efficient in energy use and can help you save energy bills significantly and considerably.

American-Standard Heat Pumps Prices By Model

American Standard heat pumps are offered in a variety of models. A baseline price list is then required to help form a comparison that is both objective and equal so that you can make a sound decision about which one you should purchase by the end of the day.

Each model of American Standard heat pump is provided and sold with a programmable heat pump thermostat control, an air handler of 1300-1400 cfm, and an outdoor condenser of 3-ton size. Keep in mind that the comparison is made with the price of all heat pump units being divided based on whether or not a system is installed.

The Platinum 20 model is the most expensive heat pump of them all, offered at a price of $4,540 for a system-only option and $10,500 if you want it with its system installed.

If you want a Platinum 18 model complete with its installed system, you will have to pay for $9,300 while its system-only variant comes at a price of about $3,745.

You will have to fish some $8,775 out of your wallet to get a Gold 17 heat pump model with its system installed while that number will drop and become $3,355 for the system-only option.

The price of a Silver 16 heat pump model would be $7,750 with its system installed and it would be about $2,790 for system only. A system-only variant of Silver 15 heat pump model costs you $2,450 if you choose the system-only and $7,090 if you choose it with its system installed.

To get a Silver 14 heat pump model, the cheapest of them all, with its system installed, you will have to pay for $6,475 and if you choose the model with its system only, you will have to pay for at least $2,055.

American-Standard Heat Pumps Prices By Sizes

A “Manual J” calculation will be performed by a contractor prior to installation of a heat pump in order that they can get a precise size. There will be some factors to take in including the types & directions of the windows, the amount of insulation, and the location of your home. Following the calculation, the size of the right heat pump units to install will range from 1,5 to 5.0 ton

Each American Standard heat pump is offered with a programmable thermostat, an air handler of 1300 to 1400 cfm, and an American Standard outdoor condenser of 3 ton and an SEER of 16.

A home that ranges from 600 to 1000 sf can be supplied with a 1.5-ton heat pump, at $2,040 for system only and $6,500 with system installed.

A home within a range of 1001 to 1300 sf can be supported by a heat pump size of 2 ton. This will cost you $2,250 for the system-only variant and $7,050 with system installed.

If the house you own is within a range of size of 1301 to 1600 sf, a heat pump of 2.5 ton should be sufficient. A heat pump of this size is priced at $2,450 for the system-only option and $7,470 with its system installed.

A 3-ton heat pump should be enough for a home ranging from 1601 to 1900 sf, at $2,750 (system only) or $7,750 (system installed).

Paying $3,360 will give you a system-only 3.5-ton heat pump while $8,090 will get you the same size with system installed. This will fit a home in a range of 1901-2200 sf.

A 4-ton heat pump can fit a home size ranging from 2201 to 2600 sf, at $3,450 or $8,470 (system only and system installed, respectively).

A 5-ton heat pump will be the most expensive at $3,860 for system only and $9,390 with system installed. A heat pump of this size can satisfy a home size range of 2601-3200 sf.