Home » Heat Pump
Category Archives: Heat Pump
In the Zone 5 and Zone 6 areas, the winter can get very cold. This is why installation of heat pump unit is very important within this area. It is possibly the safest alternative to maintain comfortable temperature within the house. The most recommended type of heat pump for this area is definitely the hybrid kind or known as double fuel or hybrid system. Based on various reviews on dual fuel heat pump, it is more economical option for places that experience very cold winter.
As you know, it is hard to control your inside temperature during winter season. That is the reason why your energy bills during this season will spike up. By splurging on dual fuel heat prices at the beginning (which are not cheap at all), you will be able to save more in the long run. There are plenty of factors that determine the price but with them, come its benefits.
Dual Fuel Heat Pump Cost Effective
Perhaps you are not totally sold on the idea of installing a double fueled unit yet. It is hard to wrap in mind that this unit is going be the cheaper alternative for you when it comes to heating up the house during winter, especially because the installation cost for such unit is very high.
The cost is likely going to climb up if you do not have necessary items ready at hand too, such as ductwork. In order to give you better idea about the notion, we will be comparing the price difference of hybrid fueled unit costs and single fueled unit costs installed in same place.
First, let’s take a look at this standard system cost illustration. To purchase and install the unit, you have to pay about $7,150 in the beginning. This does not include additional features that are needed to support the heat pump. With this system installed, you should expect to pay about $2,114 per year for energy bill.
Now, compare it to the cost for dual fuel unit’s cost. In order to buy and install the unit, you have to pay slightly more than $8,000. This price is likely to hike up for additional items. However, you should expect less annual energy bill which is around $1,855.
As you can see, the difference of installation cost would be around $865. Meanwhile, the difference of annual energy bill is approximately $259. You will be able to pay off this difference in just three years and a month. From then on, you will only reap the financial benefits.
Dual Fuel Heat Pump Explained
Some of you probably still do not fully grasp the concept of double fueled heat pump. What are the characteristics that differentiate it from the single fueled heating pump units in the market out there? double fueled heat pump unit is a unit that can be fueled using two types of fuels. One of them is electricity. There are several components that make double fueled unit the way it is.
Since the system is fueled by additional fuel system, you will need to install furnace to accompany your standard electric system. The two most common furnaces that you will find in the market would be gas and oil furnaces. Nowadays though, people prefer the gas one because of safety reason and the fact that it is more economical and clean than oil.
Condensing Outdoor Unit
Condensing unit is a pivotal part in such system. It is placed outdoor and run by a machine called compressor. The compressor works to manage the cycle of your fan system, coil, and refrigerant. Because of this, you can control the temperature.
Inside Coil System
Inside the house, you will have to install coil system. It is linked to the condensing unit which is placed outside. The coil system is also connected to your furnace system which will be activated when the temperature drops to certain degree.
These two lines are made of copper material. They are installed to connect the coil system with condensing unit. The lines cooled gas as fuel.
Dual Fuel System Work
Now that you have understood the complexity behind this pump system, you need to know how the unit works. Truthfully, the mechanism is not difficult at all. There are three main modes in which this system will be operating throughout its cycles. Let’s take a look at this list.
Warming Mode Using Electric Fueled Heat Pump
During winter, your heat pump is going to work as heater. The refrigerant system is going to absorb heat from the outdoor condensing unit and transfer it to the coiling system inside. This heat will be absorbed by ductwork and spread throughout the house to increase indoor temperature. Smart system will be able to detect the temperature automatically, although you can setup manual system as well.
Heating Mode Using Additional Furnace
As you know, your electric fueled heat pump system will need to work very hard if the indoor temperature drops to low level. This causes high electricity absorption. In hybrid fueled system, when the temperature drops to extremely cold temperature, the furnace will be activated instead. It will fuel your system until your indoor temperature returns to warmer state.
Air Conditioning System
In warmer seasons (possibly when your indoor temperature is higher than the outdoor temperature) your heat pump will work as air conditioner. In this case, the refrigerant will carry the indoor heat absorbed by ductwork from inner coil system to condensing unit outside. This way, the temperature inside your house is maintained at comfortable level. The setup can be done manually or automatically depending on ur unit’s system.
Top 5 Best Dual Fuel Heat Pump Brands and Costs
If you are finally set on purchasing double fueled heating pump unit for your house, you may one a recommendation or two about the best brands to get as well as their costs. Here are five best brands in the market.
Carrier Infinity 16
Carrier is a well-known brand within the market. The Infinity 16 is an example of dual fuel model that this manufacturer produces. It has SEER and HSPF rating of 17.5 and 9.5 respectively. The furnace model to accompany it would be the Infinity 96. To get the 96.7 efficiency rate you need to pay $8,800 for unit and installation.
The RP16 is an example of dual fuel heating system from Rheem. This company has since release more models like this. Its SEER rating is 16 while the rating of HSPF would be 10. The Rheem’s R95P is the furnace system that you need to install to accompany this system. In total the efficiency rate would be 95. The total cost for installation would be $8,300.
Heil 15 Quiet Comfort
The 15 series from Heil is a dual fuel unit that is known to emit only low decibel noise. The SEER and HSPF ratings for this unit are 16 and 9. You need to accompany the system with a 96 furnace model and pay total of $7,750 (including installation). The efficiency rate is 96.2.
Goodman’s GSZ16 is also a leading product from the old manufacturer. It has SEER rating of 16 while the HSPF rating would be 9. GMEC96 is the right furnace system to install with this unit. The total cost for installation would be $6,800 to give you 96 efficiency rate.
Lennox XP16 Elite
XP16 is an Elite model from Lennox that has SEER and HSPF ratings of 17 and 9.5. This high end model should be installed alongside EL296V furnace system. To install the unit you have to pay $8,650. You get efficiency rate of 96 for that price.
Several manufacturers produce heat pump in various categories. You will find brands which focus on high SEER and HSPF. On the other side, certain brands are reliable for less cost heating. If you live in moderate climate, one of recommended products is Payne. Knowing Payne heat pump prices helps to estimate what you will spend for installing and repairing this appliance at home.
The cost becomes the key issue when buying heat pump. As you know, energy consumption are on par with how much you need to pay. For Payne, the product is dedicated for daily basis installation or vacation home. Moderate climate means average weather in summer and winter. You will not experience harsh condition that pushes heat pump to work harder than usual.
In the next section, Payne heat pump reviews explore several aspects. The explanation starts from features, pros, cons, models, and price. After that, you will understand which heat pump that’s suitable with your own preference at home.
Features, Pros and Cons
Heat pump is similar to other products that consist of segmentation from low to higher model. The parent company that produces Payne also develops other brands called Carrier and Bryant. You are surely familiar with both names because they have the same prominent influence in heat pump market. However, both have different technology and features.
Payne is low cost product which focuses on effectiveness to deliver as much with low energy consumption. This objective is different from Carrier as premium brand. All models in Carrier lineups are dedicated to generate the best result. High SEER and top HSPF means your room becomes more reliable. With such amazing feature, Carrier has drawback that takes extra cost to produce due to advanced technology. For Bryant, some models have same technology with Payne and Carrier. This brand is for mid-market.
1. Two-step mode
Payne uses single and two-step mode for their heat pump. Single step is the most basic technology with less efficiency. On the other hand, this mode is better for long utilization. Energy consumption is in low level. As the result, you do not spend extra cost for electricity. Two-step mode is advanced version of previous one. It is common technology that’s available in major heat pump. Of course, Payne still considers this mode as the best one to generate heating and cooling in moderate climate.
2. Less noise and long warranty
Other features to consider are less noise and long warranty. Based on official information, Payne has decibel level between 74 and 76. This range is lower than 71 that most heat pump will be considered as the quietest at all. With this feature, you will not hear any sound when installing Payne at home. You do not need noise insulation while Payne is working around in your room.
For warranty, Payne provides up to 10 years support. This is not short term for heat pump utilization. Manufacturers know the capability and durability of Payne in average utilization. If you have issue before 10 years, ask the nearby dealer for maintenance.
One benefit for having Payne is interchangeable regarding spare parts. If certain parts of Carrier are broken, Payne and Bryant can help. Situation is similar to Payne when having maintenance and machinery issues. Mechanics will repair with existing spare parts from Carrier and Bryant as long as both use the same technology and mechanism.
Perfect heat pump to fulfill customer needs is utopia. Payne also has drawback that should be put into consideration. It is for moderate climate, which means you will experience unstable heating and cooling when harsh weather comes. Of course, people who live in extreme climate cannot rely on Payne. As alternative, Payne is suitable as secondary support or backup plan when primary heat pump is down.
The technology is not complex and Payne does not have precise control. You might get a little bit higher or lower heating that does not exactly in accurate level. This is not major issue in moderate weather. For solution, check each Payne model and read the technical specifications thoroughly. The best model will helps to overcome this situation.
Payne Model’s Review and Recommendation
It is time to explore Payne models one by one. Before going further, you should understand that most heat pump reviews would put efficiency and cost as the most important aspects to consider. Highest efficiency generates the best heating platform. For the cost, the advanced technology makes manufacturers put extra cost to spend. Two categories to consider are SEER and HSPF. You might be familiar with both terms because they are easy ways to indicate heat pump capability. SEER is number that represents heating capability and HSPF for cooling. More SEER means the heat pump can work efficiently, and the situation is similar to HSPF where higher number is better than the low one.
The lowest Payne model is PH13NB, and the product is discontinued. However, you can still find this one as secondhand product that’s still reliable. The product had SEER 13 and HSPF 8 with single-stage mechanism.
2. PH14NB and PH15NB
The new ones are PH14NB and PH15NB. From those names, you understand that 14 and 15 are SEER level. Both have moderate capability but much more reliable for daily utilization. For HSPF, they have 8.5 and 9.0 level respectively.
Another better option is PH16NC in SEER 16 and HSPF 9.0 with single-stage mode and 10-year warranty. The SEER is better than previous ones, and SEER 16 is considered as average level for heat pump. HSPF may not be much different but 9.0 is also average level. The best Payne model is PH16NA with SEER 17 and two-stage mode. This product is more advanced and HSPF is at top level, which you obtain at least 20.
Which one is the best for you? It is not simple question because heat pump involves several aspects before you purchase and install. If you live in America, you need to know which area you are belong to. The states are divided into several climate levels. Northern hemisphere is mostly cold area and southern region goes warmer.
Payne is better in area with relatively warm climate near to equatorial area. Some cities are located in high terrain and extreme desert that needs extra heating or cooling. For such purpose, Payne is still reliable as long as you do the maintenance properly.
Payne Heat Pump Prices by Model
Each model has different capabilities, and the price depends on what feature the devices have. More technology makes the price go higher and expensive. Based on the price, Payne model starts from the lowest one, which is PH14NB 14 SEER. As it mentioned above, the appliance with SEER 13 is no longer available. The lowest one is SEER 14, and this model has price at $1,470 for system, and $3,900 for installation.
For a little bit higher, you can choose PH15NG with SEER 15. The Price is affordable and you spend only $1,650 and $4,150 for system and installation respectively.
Another model is PH16NC with price $1,870 for system. The installation cost for this model is $4,470. From three models that have been explained, the price is not much significant. With extra cost, you can obtain better model than the lower one. The top model is PH16NA that capable to produce SEER 17. The price starts at $2,370 for system and $5,050 for installation.
The prices that have been listed above are usually for the base pricing model. For your information, heat pump is product that depends on market demand. Higher demand means you pay more because many people want the same products. On contrary, in certain period, the demand may low, and the price is lower, even dealer or stores offer the discount. Each dealer or seller put different price based on the regulation in local area. Some governments consider heat pump as the most basic appliance. In that case, the products receive tax support, and price is lower.
You should spend the cost for two things: system and installation. System means the product itself, and the installation is process for installing. The product is not much in term of price, but the installation is not in the same league. The cost for installation increases if the house or room needs extra support. For keeping the cost as low as possible, find the most experience mechanics because they know what to do.
Payne Heat Pump Prices by Size
Heat pump covers area in the specific size. Larger room needs big appliance or extra pumps. On the other side, smaller room is enough with small size heat pump. That’s why the size becomes important topic when decided which heat pump is the most suitable at all. Keep in mind the size also affects how much you spend. Bigger system needs extra money for installation, and vice versa to smaller one.
The smallest product has size 1.5 ton and reliable for up to 100 square feet. For the price, you should spend $1,120 and $3,150.
The cost for 2 ton and 2.5 tons are quite similar to lower one. You only spend extra $200 or $300 for the system. The installation needs extra cost between $300 and $500.
For 3.5 ton, the heat pump is capable to be in the area with size between 1900 and 2200 square feet. The cost is $1,170 for system, and $4,790 for installation. With those costs, you may check a little bit higher model.
The biggest one is 5 tons that’s more than enough to be in home size up to 3300 square feet. The price is $3,320 for system, and the cost for installation is approximately $5,550.
There are few tips that you can apply to obtain the cheapest price.
Firstly, check the price between one dealer and others. Even though they sell the same product, the price range is different. Choose the cheapest one in your area.
After that, contact the experienced contractor for handling the installation stages. The cost is quite much, but the result is excellent. You may spend extra money for excellent installation, but there is less issue in the future.
Well, heat pump is not complex system and most people can do the installation. Unfortunately, only people with experiences are capable to deliver the best result. Sometimes, they offer discount as a part of extended purchase if you also use them for regular maintenance.
If you are looking for more affordable heat pump unit with higher than average quality, you should look at Ruud models. This heat pump line has been around for decades and leading the development for more efficient and environmental friendly units.
You will read some Ruud heat pump reviews by homeowners who already installed the unit at their home. The reviews will make you aware of the strength and limitation of certain Ruud products. That way, you will be able to make better buying choice. Reviews also inform you about the kind of unit that actually fits your needs.
To encourage you in doing better budget management, Ruud heat pump prices will be discussed as well. As you know the price for a single heat pump unit varies due to various conditions. It can be because the model that you are choosing or due to its size. Without further ado, let’s learn more about Ruud’s products.
Features, Pros, and Cons
Why do people purchase Ruud’s heat pump units? There are plenty of interesting features that its lineup has to offer for homeowners. Of course the features can be hit and miss, however knowing them will help you getting to know this brand even more.
1. Inverter-guided Technology
Ruud has started to introduce inverter-guided technology in its product. This technology allows for variability in the heat pump’s capacity. It means that you no longer have to face extreme fluctuations in heating and cooling. The result is more accurate temperature balance. Humidity within the indoor part of your house is also highly controlled. That way, the house becomes more comfortable.
2. 3-step Cycle
A model in Ruud’s lineup has already introduced 3-step cycle within its system, from low to high then to overdrive. Normally, you will only find the low and high steps. During overdrive step, the indoor and outdoor coils’ refrigerant is quickly cycled between the two coils by compressor. This mode enables heat pump system to draw heat from outside to heat up the indoor part.
3. EcoNet Technology
The EcoNet is control panel for your heat pump. It can be attached to your wall for easier control when you are at home. This tool is Wi-Fi enabled too. You can install application on your phone then monitor and control your heat pump even if you are far away from home.
4. 10-year Replacement Warrant
This particular feature is available for the line’s Ultra models. Since other manufacturers have started putting on 10-year replacement warranty for their products, Ruud also starts to do similar thing with its high-end models first. Buyers who experience system failure within 10 years after purchasing the unit can get condensing unit replacement.
5. Double Fuel System
To support usage in cold climates, most Ruud’s models are equipped with double fuel system. Homeowner is recommended to pair the heat pump with gas furnace (which means paying additional cost). When the temperature is below freezing point, gas furnace will take over from the electric fuel system for higher efficiency.
6. Cabinet Design
One of the biggest issues in owning heat pump is maintenance. Homeowners reported that they have a hard time trying to clean, do maintenance work, and repair heat pump unit simply because the inner parts are hard to be accessed. Some Ruud models have cabinet design that enables you to do any maintenance-related job with ease.
There are other advantages of buying a Ruud unit in addition to getting variety of innovative features. First, the price of Ruud’s unit is likely to be cheaper than other comparable products in the market. Price issue often drives homeowners away from installing a heat pump. In addition to that, the durability of Ruud’s unit is also remarkable.
Unfortunately there is a percentage of buyers who filed a complaint to the company due to malfunctions, particularly refrigerant leaking. It usually happens after three years of installation. People also complain about the fact that Ruud’s warranty is not comprehensive. It does not cover Freon change and costs of labor.
Ruud Model’s Review and Recommendation
There are several Ruud models that receive great reviews and highly recommended by current and past users. Let’s take a look at this list.
1. Value 13PJL
13PJL is known as a value product from Ruud, its SEER and HSPF ratings are indeed only within market’s standard. Still, buyers have reported that this heat pump unit is still running smoothly without issue even after four years. An important thing is not to install oversize unit within your small home.
2. Value 15PJL
This unit is another value product from Ruud that receives nods from buyers. Like 13PJL, the ratings of SEER and HSPF of this product are not exactly high. Buyers have reported that this unit is capable of cutting down the cost of home operation by half, though. It is definitely a worthy investment.
3. Achiever Two-stage RP16
RP16 has SEER rating of 16 while its HSPF rating is 9, which is above market standard. The compressor works in two stages during heating and cooling for precise control. It is designed to operate quietly by adding composite base pan on its structure. This unit is also resistant to salt water which means you can install it in coastal area. It is an Energy Star certified unit.
4. Achiever UP15
This unit has quite similar qualities to RP16 with similar SEER and HSPF ratings (16 and 9). However, the compressor works in one stage instead of two. Nonetheless, the efficiency of UP15 is still being raved about by current and past users. Like RP16, it already receives certification from Energy Star.
5. Achiever Plus UP17
UP17 is one of superior units within Ruud’s current lineup. The SEER rating of this unit is 18.5 while its HSPF number is 8.5. The compressor works in three stages in order to deliver more precise temperature balance and comfort. EcoNet technology is equipped within this unit. It works quietly and is also salt resistant.
6. Ultra Variable Speed UP20
The most capable unit of Ruud’s lineup is definitely the UP20. This unit has SEER rating of 20 and rated 11 in HSPF. Its compressor works at variable speed to deliver the most accurate temperature and humidity control. It is also equipped with EcoNet technology. When purchasing this, you get 10-year replacement warrant.
Ruud Heat Pump Prices by Model
When you are shopping for a Ruud’s unit, the first thing that you need to think about is which model that you are going to purchase. Every model has different features and those features determine their fitness to be placed within a certain environment.
As an example, if you are living in a home but having planned to move within the next few year then perhaps the more economical choice for you would be the Value models (such as 13JPL and 15JPL). The total cost for unit and installation varies from$4,500 to $4,700. The unit is proven to work well after few years without high maintenance cost.
Meanwhile, the middle tier model such as Achiever RP15 and RP16 are more suitable for installation within Zone 5 area that has cool climate. The unit’s price would be around $1,870. However, you need to pay additional $3,700 for the installation process. The price might spike up if you add extra features, although that might not be necessary for installation within this area since the climate is not extreme.
RP17 is a unit that is recommended for Zone 1 and 2 that are known to have hot climate. The unit itself is likely to cost you slightly under $2,000. For the installation, you need to pay additional $3,700. Even if the price is quite high, you are likely to get your investment back since this unit is quite renowned for its high efficiency.
For extreme cold weather like in Zone 6 and 7, you will be recommended to purchase UP20 model which is the company’s high-end product. The price for a unit would be around $2,200. To install the unit, you will need to add $4,000 to that amount. This price is very likely to increase especially because for those zones the unit is highly suggested to be paired with AC system and gas furnace for efficiency.
Ruud Heat Pump Prices by Size
Once you have decided on a model to purchase, you need to start considering the size. A model will come in several size options. You have to find the perfect one that will be able to cover your house adequately. If the unit is too small, the output is not going to be satisfying. Meanwhile, if the unit is too big, you have to suffer for high installation cost. It is not going to be comfortable either
Small family houses require only 1.5 to 2 ton unit. The coverage for 1.5 ton unit would be around 600 to 1000 square feet, while the 2 ton unit is from 1001 to 1300 square feet. The system price would vary from $1,370 to $1,540. For the installation, you need to add $3,100 to that amount.
Medium size houses are likely to work well with 2.5 to 3 ton units. A 2.5 ton unit is able to cover 1301 to 1600 square feet space. Meanwhile, the 3 ton unit can provide coverage for 1601 to 1900 square feet area. To purchase the system without installation, you need to pay $1,770 to slightly under $2,000. Professional installation will cost you extra $3,700.
Bigger houses will need 3.5 to 4 ton units. If your house’s size is around 1901 to 2200 square feet, then a 3.5 ton unit is sufficient. However, you may need a 4 ton unit if the house’s size is around 2201 to 2600 square feet. The unit’s price for 3.5 ton unit is around $2,200 while for a 4 ton unit is $2,600. The cost of professional installation is about $3,700.
For very big size houses or even office, 5 ton unit is recommended. This unit is able to cover 2601 to 3200 square feet space. One unit will cost you around $3,150 which is still quite affordable if compared with market’s standard price. To install the unit, you will likely to pay above $3,800 simply because big unit at big space will need additional features to help the air disperse.
You can choose several brands of heat pump from prominent manufacturers. One of them is Coleman that becomes the top choice for heat pump product. People often ask about how much Coleman heat pump prices. Knowing the price is important for them before deciding to purchase and install. On the other side, the price is only one aspect to consider related to heat pump. Consumers should put the functionality, model, installation, and specifications that go side by side with the price or cost itself.
Coleman heat pump reviews will explore several aspects related to heat pump produced by Coleman. At the first section, you can start from pros and cons. If Coleman has more pros, buying this product is worth your money. The review includes model because this aspect influences almost everything. Advanced model is more expensive, but with high efficiency.
When discussing about model, you cannot forget the size. The product should adjust to where you want to install. Small and big rooms have different needs regarding heat pump. Coleman produces products to fulfill area from small to the biggest one. More about this topic will be explored in the following sections.
Features, Pros and Cons
First section explores features that available in Coleman heat pump. Here they are.
1. Climate Connect
Coleman has technology called Climate Connect. This feature is dedicated to adjust capability of heat pump in order to deliver the most efficient performance. Each heat pump has setting and panels to control climate condition. The room will be more comfortable because users adjust the setting to what temperature and condition they want. It seems that what Coleman has is similar to others.
Even though the main objective is similar, Coleman installs this feature with less human touch. It means the device will adjust climate connect automatically. Users do not have to go for setting section to increase or decrease heat performance. In general, this feature is automated climate control that adjusted automatically with human involvement.
2. Coleman Whisperdrive
Another feature is Coleman Whisperdrive. From its name, you can expect what this is about. This technology is capable to reduce the sound or noise. In general, heat pump is one of machineries that generate excess noise. The onstallation is mostly attached at outdoor, and you can hear the noise excessively even though you stay inside the room. This issue is not what you get when having Coleman heat pump. The noise is insulated, and the heat pump works quietly.
3. Coleman Echelon
The last feature is smart communication via remote app or software. Coleman Echelon is technology for communication thermostat. You can determine the level of thermostat using Wi-Fi connection. Only expensive product has Echelon, and you need to pay more for this one. Coleman shares this technology with other brands but different name that’s still under similar parent company.
Next, those features have pros and cons. Advanced technology is not perfect one in term of implementation. Of course, there is benefit to consider. The climate connect and Echelon thermostat are features that boost the device’s capability. In simple term, this is benefit for having Coleman heat pump in your home. The device can manage to deliver temperature and heat automatically based on the current situation.
Moisture, humidity, rain, snow, cold, and other weather conditions become the sources to analyze then send the communicating thermostat to handle the rest. With precise data, this heat pump can generate effectively and efficiently compared to other brands. The rest benefit relies on remote access without standby in nearby location.
After knowing what benefits you get, next section is disadvantages. Communicating system is promising technology, but it still needs further development. Coleman puts this feature only for expensive model. In that case, you need to spend more money to obtain this one. That’s not good idea if you are in tight budget. The last resort is non-communication system which is available in lower model. Besides the high cost, this technology requires enough data to generate the precise heat work.
Outdoor installation is out of option due to weather, and the climate may change significantly. You only use this feature at ultimate mode when the heat pump is for indoor installation. Temperature and heat are easy to track and analyze. After that, the thermostat will send which the best mode for particular room. In long term, you need to put extra maintenance that may increase the cost. More complicated device makes the maintenance and repairing becomes more expensive.
Coleman Heat Pump Model’s Review and Recommendation
Heat pump uses two values for capability measurements. When purchase this appliance, most people look for SEER and HSPF. High number means heat pump is more efficient in term of managing heating and temperature. SEER is value to represent cooling ability. If you live in country or area with high temperature during summer, it is best to purchase heat pump with higher SEER. On the other side, HSPF is capability to manage heating during cold season. Higher number represents better heating system.
Living in cold area means you need extra heating and best way to purchase heat pump with HSPF as high as possible.
1. Echelon HC20
Coleman has heat pumps with vary SEER and HSPF options. The lowest SEER is 14 and the highest one is 20. For HSPF, the lowest number is 8.2 and the highest one is 11. The best Coleman heat pump is echelon HC20 with SEER and HSPF at 20 and 11 respectively. This product is the best option for any situation. You can install in area with extreme weather during summer and winter. For area with mild climate, having 14 SEER and 8.2 HSPF is enough. You still feel comfortable and heat pump works based on what you need.
2. LX CH16
Hotter climate needs proper SEER level. You need at least 18 SEER that enough to manage humidity and summer heat. Lower number below 18 is not bad choice but heat pump should have 2-stage compressor technology. It combines heating and cooling at the most efficient method at all.
Model for this purpose is LX CH16 and TH16. As you can see, number 16 in that name represents SEER level. You can check all Coleman products based on certain number to determine how much SEER that heat pump produce. Besides, you should also consider HSPF if room needs extra heating during cold season.
Coleman Heat Pump Prices by Model
Coleman has many heat pumps with specific name. In this article, you only focus on seven models that people commonly buy for their home. The lowest model is LX THJD and TH4 with similar features and specs, but in different generation. Both have the price range between $1,335 and $2,355. This is entry-level model for the moderate heat climate.
Due to low cost, many homeowners often rely on this one to manage energy consumption. Lower SEER and HSPF is relatively energy efficient for long term usage. Another similar model with slightly higher SEER is LX THJF. The SEER level is 14.5 at optimum mode. With the gap 0.5 point, this appliance generates better heat.
As it mentioned above, Echelon is brand with high SEER. You may choose Echelon HC6B and HC8B with SEER level is 16 and 18 respectively. In LX model, there is also LX CH16 with 16 SEER. Even though the SEER is similar, LX uses different compression unit. On the other side, Echelon is more advanced due to communication system. The price for HC6B is between $3,125 and $4,200. You need to spend additional cost for installation at least $5,125, and the maximum cost is approximately $7,300.
The highest SEER level is Echelon HC29 with 20 SEER. The price starts at $3,700, and the maximum price is $4,700. In addition, the installation needs cost at least $5,700 with the highest possible cost of $7,200.
Each model has pros and cons regarding the price. You may spend less and receive lower SEER. On the other side, the highest SEER is the most expensive one. Information also includes installation cost that increases side by side with the price of product itself. You can consider before buying and installing. Coleman provides lifetime warranty for compressor. This is different from other brands that mostly only offer up to 12 years.
Coleman Heat Pump Prices by Size
Efficiency and durability are crucial to put into consideration before installing heat pump. Larger room needs bigger appliance to maintain the temperature and heat level. In that case, you need to check the size of heat pump then adjust it with room size. Using small heat pump for large room is ineffective. On contrary, big pump for tight room is useless and not efficient in term of energy consumption.
Coleman offers heat pumps based on the size for customers. The smallest size is 1.5 ton, and it is capable to generate heat for the area between 800 and 1000 sf. The cost for this model is $1,200 for system, and $4,120 for installation.
For 2.5 and 23.5 tons, you need to spend money between $1,350 and $1,760. The heat pump is capable to maintain the temperature and heat at area between 1500 and 2200 sf.
The biggest one has size 5 tons with price $2,560, and the installation is $6,020. You can use two devices of 1.5 ton for the area that’s capable to cover 3.0 ton heat pump. This kind of calculation works if you know how to manage the heat properly.
From explanation above, you see that the cost consists of two aspects. You spend for system and installation. System means the product that you receive from store.
Moreover, the price is varied, depending on where you live and nearby dealer. The installation is cost to install heat pump on particular room. You may spend more money if the device is more expensive.
Advanced heat pump needs expert and professional to do the installation properly. Besides, the bigger heat pump requires more supports which may increase the cost to manage the installation. The price is varied due to the demand and market condition. In area with high demand, the cost for heat pump increases and you should spend more. This is common situation and Coleman has many stores, including private seller. You have to find the one that’s suitable with your budget.
Many homeowners would consider heat pump as worthy investment. This equipment has been proven to be more economical and environmental friendly if compared to any other temperature regulating unit. However, not every homeowner has this unit installed within their home. Those who have not installed this unit argue that the cost is simply too high. To break down that notion, this article will discuss Heil heat pump prices. Heil is one of the most well-known heat pump series currently distributed in the market.
Knowing the prices for Heil heat pumps will be beneficial to you, especially if you are trying to budget your home building and renovation. Installing a heat pump is likely to improve the value of your house. You have to keep one thing in mind, though: it is important to choose good quality heat pump to achieve such results. Heil heat pump reviews will be discussed in addition to the price list to give you a gist about varied models in Heil series. That way, you will be able to do more logical decision making when purchasing a unit for your own house. Aren’t you excited to get to know the Heil heat pump series? Let’s get to it.
Features, Pros, and Cons
Since Heil is known as one of leading heat pump series in the market, you must be curious about the features this series has to offers. The following list elaborate highlight features that can be found in the models of Heil.
1. Observer Thermostat
This is a breakthrough feature that you can hardly find in other heat pumps. Observer thermostat allows homeowner to monitor and control their heat pump system even when they are away from home. It can be done as long as the unit and remote thermostat are connected to Wi-Fi system. This way, homeowner can monitor the temperature inside their house if they leave the thermostat on while going out. It also works wonder in saving energy since you can always turn off your thermostat remotely if you forget to do that.
2. Hybrid Fuel System (with Gas Furnace)
The system enables your heat pump unit to switch automatically based on the temperature read by it. There is a specific temperature point that will serve as switch point (usually it would be around 35ºF). When the temperature goes above that point, heat pump system will be activated. Meanwhile, if the system reads that temperature goes below that point, furnace for heating will be activated instead until the temperature climbs back to the switch point.
3. Replacement Warranty
It is quite rare for heat pump products that offer replacement warranty as long as 5 years. Heil offers this warranty for many of its models. Some of the products even have 10 years replacement warranty. You can get full replacement of outdoor unit if during the course of warrant program your compressor fails to work.
Another highlight feature offered by some models in Heil series is SmartSense. This feature enables homeowner to have more precise and efficient control of their heat pump unit. SmartSense will heat up or cooling down the room in five different stages. During those stages, the working capacity will vary from 25% to 100%. This means that the heat pump unit is working more efficiently without using too much energy when it is not necessary to.
The first plus point in buying Heil’s heat pump model is the fact that there are plenty of beneficial features that homeowner will be able to get. Many of its features are added to ensure that the unit will be able to run efficiently. When the unit can run in efficient manner, you will be able to cut the operational cost of having the heat pump. The warranty is also a nice feature to protect your investment.
However, there are definitely some cons in buying one of its models. First, Heil does not have modulating heat pumps in its lineup. Modulating heat pump is known to offer the highest level of efficiency as well as most comforting temperature adjustments. Even if its current technology supports efficiency and smart adjustment, it might not be enough. In addition to that, many users find that the observer thermostat is at times unreliable when it comes to temperature monitoring.
Heil Heat Pump Model’s Review and Recommendation
There are several models in Heil lineup that are highly recommended by current users. There reviews on these models are generally positive.
1. HVH8 Model
This model is known to be highly efficient. The SEER number of HVH8 is 19, while its HSPF rate is 11. It is listed as one of Energy Star rated product due to its energy saving features. This model is highly recommended for extreme climate use with added gas furnace in the system although it will inflate the budget slightly.
2. HCH6 Model
HCH6 is another highly recommended heat pump for extreme climate due to its working mechanism. If you pair it with gas furnace, you will be able to cut down your operational cost significantly. The SEER number of this product is 17.5 which is way above the standard. Meanwhile, its HSPF rate is measured at 9.5. This product also receives Energy Star rate.
3. HSH5 Model
This model is an alternative for the previous two products that are quite expensive. Despite being cheaper, HSH5 model still offers nice functionalities, though. The mechanism is standard one stage heat pump. It has SEER number 16 which is above the standard and HSPF rate 9. If you live in a place with warm sunny season, this should be considered.
4. N4H4**C Model for Coastal Area
N4H4**C is a model designed to suit the need of houses in coastal area. The SEER number of this model is 14 while the HSPF rate is 8.5. The structure is designed to fit characteristics of coastal area, mainly with the fact that its air will contain higher level of salt. Regular heat pump will not be able to preserve long since salt can corrode its parts.
5. N4H4 Model
The N4H4 model is designed to fit in small places, such as below the deck. This unit has 14 SEER and 8.5 HSPF. It fits is small spaces not only because its size, but also because it does not emit loud noises (noise level is below 69 decibels).
Heil Heat Pump Prices by Model
Now that you have known reviews on some of the heat pump models, you might be curious about the price. As a starting point, we will look at the most basic models in the lineup, NH4H4 and the specialty N4H4s before moving onto the higher end products.
The price for NH4H4 ranges from $1,225 to $2,295. If you want to have it installed, you may need to pay additional $1,900 to slightly above $3,000. Meanwhile the price for the two N4H4s ranges from $1,455 to $2,550. The price for regular N4H4 is slightly higher. You need to pay additional installation cost which ranges from $1,000 to $3,000. As expected, the cost will be higher for the **C model.
Meanwhile, the price for mid tier level (with SEER number ranging from 14 to 15) such as NXH5 and NXH6, the starting price would be slightly over $2,000 and can go up to more than $3,000. The installation cost is starting from around $2,000 and can climb up to $3,000. In total, the maximum amount you need to prepare for the installation would be around $5,000 which is not cheap.
The upper mid tier level of Heil models are HSH6 and HSH5 which are considered nice alternatives for the deluxe models. The 16 SEER models have starting price that ranges from $2,475 to $2,635 while the maximum price can reach $3,525. To install one of these units, you need to pay additional fee that ranges from $2,000 to abover $3,000. The installation cost for HSH6 will be higher especially if you add gas furnace.
As expected the deluxe models, HVH8 and HCH6 are the most expensive in the bunch. The cost for HCH6 system is varied from $3,255 to above $4,000. To install it, you will need to pay from $2,000 to $3,000. HVH8 is the more expensive unit with price ranging from $3,635 to $4,695. The installation cost is similar to the HCH6, though.
Heil Heat Pump Prices by Size
Another important thing to consider when purchasing the unit is the size of your home. There are homeowners who make mistake by installing a system that is too big for the house (which inflates the cost significant). Meanwhile, there are also homeowners who install too small system so they cannot get the utmost benefit. Knowing the price by size is important.
For standard size family home, you may be able to get away with installing a unit in size of 1.5 to 2 ton. The 1.5 ton unit can cover 600 to 1000 square feet area while the 2 ton unit is capable of distributing even temperature in 1001 to 1300 square feet area. The price for such unit size varies from $1,225 to $3,635. Installation cost varies from $1,000 to $3,000 depending on add-ons.
To accommodate slightly larger houses, you can use 2.5 to 3.5 ton unit. The 2.5 ton unit will cover 1301 to 1600 square feet area with cost varying from $1,445 to $3,395. Meanwhile a 3 ton unit can cover 1601 to 1900 square feet space with starting cost $1,675 to $3,550. If you want to choose 3.5 ton unit, the cost would be ranging from $1,745 to slightly over $3,500. The installation cost for these unit sizes are quite similar, which is from $1,200 to over $3,000. Basic installation cost for 3.5 ton unit is significantly cheaper than the other two.
If you have very large space you can install the biggest unit size, 4 ton or 5 ton. A 4 ton unit is designed to accommodate 2201 to 2600 square feet space. Meanwhile, the 5 ton unit has larger coverage of 2601 to 3200 square feet. The price for one of these units will range from around $2,000 to $4,695. When installing the unit, you will need to prepare at least $2,000 (for basic installation).
Nowadays, technology is increasingly developing and making human life more advanced which is marked by the increasingly easy of humans to improve the quality of life. Now, many tools are used to, even make the temperature of a room the same as what we want. Air conditioner is one of the tools that we often use.
However, here will not discuss that, but we will talk a lot about heat pumps, especially for Geothermal Heat Pump, cost, reviews. One way of geothermal that is happening at this time is by using hot springs that are close to the surface in the form of hot water. Street. As in a building, through a heating pump can be flowed to the surface using a ground-heating pump. In one year, the temperature under the ground remains constant and this way works everywhere. In addition, cooling the building in the summer and heating the building in the winter can use by using the same system.
What Is Geothermal Heat Pump
Geothermal energy refers to the energy produced by heat stored in the earth’s core. As a source of energy that comes directly from nature and is renewable, its use does not adversely affect the environment and humans. Heat pumping sources or heat pumps are very popular to be used for heating the room. Thermal energy from the earth’s surface that is constant throughout the year is used for this application.
This system involves a series of underground pipes and heat exchangers and requires a working channel in the structure. To provide private homes with heat, units using electricity, solid, gas or liquid fuels are traditionally used. In recent decades, solar collectors and the warmth of the bowels of the Earth have been used as an alternative source of heat energy. Warming houses with geothermal energy is called geothermal house heating. It is also a source of energy that cannot be used up and this is very good for the environment.
Pros and Cons of a Geothermal Heat Pump
Compared to fossil fuels, geothermal energy has greater benefits. First, it is a renewable natural resource, therefore, a constant supply and environmentally friendly.
It also has lower emissions of harmful chemicals making it less harmful to human health. In addition, geothermal power plants have the ability to continue working throughout the day and night regardless of weather conditions. From an economic point of view, the form of energy is cost effective and the price does not depend on fluctuations in the price of fossil fuels.
On the other hand, geothermal energy also has weaknesses. In considering the engineering aspects, geothermal fluids are corrosive and at low temperatures. This low temperature has a detrimental effect because it limits the efficiency of heat engines in power plants.
Another disadvantage that is worth noting is the construction side. Installing a geothermal power plant can affect the stability of the soil in the surrounding area especially in systems where water is injected into hot dry rock. This generator can also emit, even in low levels, carbon dioxide, nitric oxide and sulfur. Finally, geothermal locations for a long time have a tendency to cool down eventually. One reason for this is that the system designed for a particular site is too large to attract too much stored energy.
What we can get from geothermal energy sources is the permanence of energy sources that we can use continuously. What we need to think about in the use of geothermal energy sources is a tool to convert geothermal energy into electric power sources, which are also used in electronic devices such as geothermal heat pumps.
We must continue to do regular maintenance to minimize damage to the heat pump that we use. Unfortunately, the current installation for the use of geothermal energy in heat pumps is still quite expensive compared to heat pumps that use other resources.
Geothermal vs Air-Source Heat Pumps
The use of geothermal energy is a relatively simple concept like the flow of thermal energy is available below the earth’s surface, especially from subterranean hot springs. To generate electricity from geothermal sources, underground sources of steam or hot water are extracted using wells and steam rotates turbines that generate electricity.
Usually water is pumped back into the ground to refill reservoirs or recharge and complete the renewable energy cycle. Therefore, the use of geothermal energy for heat pumps is very good for the environment. We can use this forever because geothermal energy is energy that cannot be used up.
Air-source heat pumps are water heaters that use the same principles as sailboats. Like a sailboat, it only needs energy to move the sails up and down to move the boat, then the air power water heater, uses electrical energy to move heat energy from the surrounding air to heat the water. So in addition to saving energy, heat pump, or air power water heaters also produce cold air that is very suitable for tropical countries like Indonesia. The cold can be used to cool the rooms in the house and if there is already air conditioning, then the work of air conditioners can be reduced so that it also saves the cost of air conditioning, especially AC with inverter technology.
Geothermal Heat Pump Costs Factors
Just like the Air Conditioner, the heat pump also has components that must be installed in the room. Indoor Blower, useful for sucking air in the room and exhale it again. So the main task of the blower is to keep the air circulation fresh and clean but still cool when exhaled again. Besides blower indoor, there is blower outdoor.
For the completeness of the heat pump that is installed in the room, there are also several components available. Of course, products and brands that have heat pumps
on the market have different standards and this will determine the price of the heat pump products they make.
For example, the evaporator component commonly used as a temperature modifier is air that is absorbed and released into the room. This component has a material that gives effect to the price of the heat pump product.
In addition to indoor blowers, there are also outdoor blowers. As the name suggests, this one component is shaped like a fan propeller like a fan that you often see. The fan here plays an important role to cool the condenser which is the hottest part of the air conditioner.
Besides helping to cool the air conditioner, the fan also helps to heat air dissipation process and helps reduce the pressure on the refrigerant. This has also another component besides outdoor blower. For components that are used outdoors, for example is a Condenser which is a tool that serves to change / cool high-pressure gas turned into a high-pressure liquid. For its own placement, the Condenser is placed outside the room being cooled so that it can get rid of the heat out. This certainly also has a role in determining the price that needs to be spent to make a heat pump product.
Geothermal Heat Pump Costs and Brands
Speaking about geothermal heat pump products, each brand has its price for the model. We can classify the price into two classifications.
The first one is the Moderate-quality brands and average costs. This quality brand product for heat pump such as Bosch with its price from $3,100 to $4700, Century from $2,700 to $4,200, Daikin or McQuay International at $3,200 to $5,400, First Co. From $2,400 to $3,500, GeoCool from $2,500 to $7,000, Geostar from $2,300 to $3,900, Geomax $2,700 to $4,600, Hydro Royal from $2,500 to $3,500 and Nordic from $2,300 to $4,000.
These brands for moderate quality brand and it seems like to be a suitable heat pump brand for those of people who have their home in a medium size. We can say that this has good enough quality but for sure, you need to have extra cost for its maintenance if you compare with the premium quality brands.
The second classification is the Premium-quality brands and average costs. Let’s straight to the cost for each brand.
Started from Bard, this has heat pump with average cost from $5,000 to $7,500, Carrier/Bryant from $4,000 to $6,600, ClimateMaster from $4,000 to $6,500, Hydron Module from $4,800 to $7,600, MARS/Comfort-Aire from $3,200 to $5,000, Miami HP from $2,600 to $7,300, Modine from $3,000 to $6,200, Spectrum from $3,600 to $6,500 Trane or American Standard from $4,200 to $6,300 and WaterFurnace from $4,400 to $7,000.
We can say that the price and cost show the quality. From the review, these brands are showing the good reviews from the users. Logically, the premium quality brands have the premium quality material too and this makes the product will have longer life time and less maintenance. However, regular maintenance still needed for keeping the unit in well condition. The choice to choose is in your hand.
Supplies and Installation Costs
In some conditions, the efficiency of a heat pump is reduced. Equipment performance can decrease when critical temperature differences in the room and on the road are reached. In this case, the best solution is to create a system for pumping heat from the ground. The pipe must be placed below the freezing point of the soil. Coolant must be circulated through them. If the installation of these designs is hampered by high levels of groundwater, they can be pumped through heat pump equipment. Because of the design features, heat pumps cannot be used in individual apartments.
About the costs, it is depended on the size of the heat pump. For installation supplies, it can be calculated for price at $1,250 to $2,800 and cost for labor and equipment can reach about $6,500 TO $15,000. For development prospects, all depends on the pump and installation costs, the payback period is 4 to 9 years.
Nowadays, with advances in technology, human life is made easier by tools that can help us get what we want easily. One of them is daily life in the house. Heat pump is an example of a tool that makes it easy for us to get hot water for our daily activities such as bathing and others.
Some common things that cause hot water heater is one component that does not function properly. In fact, a household-scale water heater only has three main components. These components include, heat elements, thermostats, and relays. Where these components have their respective functions, which are equally vital. Cause, if one is considered to be damaged, of course, because the water heater is not hot.
As a novice user, of course you will be confused if suddenly your water heater is not hot. The good news, in this article I want to share a little knowledge about some of the causes of water heaters are not hot.
Power Related Problems
Power is the source of an electronic object in order to function. For electronic items such as heat pumps, electricity is the main source of power that is most widely used; in fact, almost all products must use electricity as the main power source. If the outside heat pump unit is not functioning properly, there is also the possibility of a problem that occurs from the power used.
Problems can come from main power sources such as electricity. Sometimes the voltage of electricity that goes up and down, together with all electronic objects, allows for damage to electronic objects. To prevent damage and problems with the heat pump resources, we use tools such as stabilizers. By using a stabilizer, we can regulate the electrical voltage to remain stable and not have a major effect on damage caused to electronic objects.
Broken relay causes dysfunction in the heat pump. Almost all electronic devices use relays, this tool has no other function to prevent if at any time a short circuit occurs then this relay will cut off the electric current. So that undesirable things can be avoided.
Relay on the water heater it mean that is located on the power cable. Precisely in the middle of the cable, there is a box, also an indication light, and a kind of button. If the lamp turns off, the relay may also die, causing the water heater to not heat.
Broken or damaged heat element. For electric heat pumps that stick to the main source wall to heat water using elements. As for the water heater that is installed on the tile using two heat sources. That is, during the day that utilizes heat from sunlight. Of course, if this element is damaged, making the water heater is not hot.
The easiest way to check whether this element is broken or not is able to directly provide electric current directly to the element. If it is hot, it means that it is still good and vice versa, if there is no heat at all we can be sure the element is broken. In addition, we can also use a multi-tester with ohm range position. If the needle on the multi-tester shows movement, then the element is still good, and vice versa.
The Thermostat is in Emergency Heat Mode
Thermostats are heat regulators found in many electronic devices used to regulate temperature. As with heat pumps, thermostats are very important to note. Sometimes a lack of attention and regular inspection have an impact on damage that could have been dealt with beforehand. With a thermostat that is maintained properly and periodically, of course there will be no problems that arise in the heat pump that we use. A non-functioning thermostat.
The purpose thermostat is regulating the electric current come in to heat elements. If the water heater tube is hot, thermostat will shut off the electricity. And will send the current to the element back after the level of water heat starts to decrease. In other words, the electric current entering the heat element must go through an intermediate thermostat. So, if the thermostat is broken, of course the element will not work and finally the water heater will not heat.
In addition, with the thermostat overheating the water in the water heater even the data is prevented. So, its function is almost the same as the thermostat on the refrigerator. If the refrigerator to regulate cold temperatures, while the water heater to regulate the level of heat in the water tube.
For water heaters on a household scale, the three factors discussed are often the cause of a non-hot water heater. Because indeed as I said earlier, for the components there are only three here. Except for water heaters where the source of heat uses gas. Which he uses automatic and also LPG.
Factors that cause it is not hot, of course, can be because automatic does not work, LPG runs out, and so forth. Therefore, it is necessary to check directly better to know the problem. When you are running out of your mind in repairing your heat pump unit, you can ask for some services to repair your unit. However, choose the trusted and right one.
In 2007, American Standard changed to Trane in order that the company can best reflect its most popular brand at the time. In 2008, the company eventually operated under Ingersoll Rand, which then sells products in both brands.
Their air conditioner units can be used in any climates, hot or cold, and their compressor can function as heat pump as well. Their purchase cost is relatively low, making it one of the most competitive manufacturers out there on the market
Additionally, generic parts can be used in their units, making them easier to repair when required. Installation charges may be higher, though, as the compressors are a bit unreliable and prone to malfunction especially when used in extreme conditions. This is where this piece comes in handy. American Standard heat pump, prices, reviews can help you decide whether or not you should buy the unit.
American Standard Heat Pump Features, Pros And Cons
The kind of capacity compressor variable technology used in American Standard units is AccuComfort. Most compressors work with one stage 100-% or 2 stages (70-% and 100%), but two American Standard models Platinum 18 & Platinum 20 work with 750 stages at a capacity range of 25%-100%. This means that in .1% increments, their compressor modulates temperature up & down in order that they can operate at a capacity exactly as needed in accordance with indoor & outdoor conditions.
HVAC technicians marks American Standard’s proprietary compressor duration highly for its performance and durability. Specifically Silver 16 Low model, on the other hand, is excellent in that it has a compact design, suitable for installation in limited space such as under decks.
Nexia can be used to integrate all smart home devices within just a single mobile app. Nexia app works well with American Standard AccuLink thermostat control and controls the Platinum heat pumps. Nexia can also connect with Alexa.
The AccuLink thermostat features a touchscreen unit with Wi-Fi connections. American Standard thrives to provide users with products that are affordable and cost-efficient. They are sold in low purchase costs and are eligible for tax rebates.
The customer service is really good in helping users. Generic parts can be used in the event that the unit requires repair and they fit the unit just as fine. Its highly efficient operation comes with an added value of being quiet. Customers can choose from a wide array of options, provided in a variety of factors such as silent operation, sleek design, and cost efficiency.
The Duration compressor might be very good in its operation. However, repair can take too long should it fail because it is a proprietary piece. Had American Standard featured more generic and universal compressor such as Copeland Scroll, users wouldn’t have a hard time dealing with replacement.
The AccuLink technology is also proprietary in nature. The purpose of using this technology is clearly to help connect all components and eventually to improve power efficiency and comfort. However, it can lead to mechanic issue. Its installation costs are also high, making it a problem for those looking for a budget option. In terms of efficiency, there are other brands out there on the market that are more efficient, making people think twice before purchasing an American Standard unit.
Their units are offered with so-so warranty period and even that is available without coverage for labor. The compressor, while good, is not too reliable and is low in its durability. This will counteract the positive side of purchasing the unit with low initial purchase costs in the end. There are reports from customers that numerous problems during normal operation can occur from time to time.
This is reportedly caused by the fact that wholesalers didn’t install the units in a professional manner. Lastly, with compressors that work in two stages of operation, cooling the room might take longer in the process, which can result in higher utility bills.
Trane Heat Pump VS American Standard Differences
This is perhaps the most frequently asked question. Customers often question about whether to buy an American Standard unit or a Trane one. This matter can be solved easily by looking back at the manufacturer’s past. Since the merging of American Standard and Trane, operating under one parent company, customers can choose to buy either.
For a lot of models, the two are 99% similar with one another. The only difference here, however, is that Trane offers exclusive models in highest-end category. The prime example is XV20i, which comes with an SEER that is really high and features that are cutting-edge.
The American Standard, on the other hand, seems to focus more giving customers an alternative that is closer to the mid-low range that offers great affordability. If it is not looking to buy something that is of high-end range, most models of either brand would suffice as there really is no significant difference separating one from the other.
American Standard Heat Pump Model’s Recommendation
The way American Standard names its products is very friendly to users. What this represents is the fact that potential users can easily figure out what each model carries to offer to its user. A unit can bear the prefixes Platinum, Gold, or Silver, signifying the series it is categorized into while the number that follows shows the SEER rating of it. This makes the model Platinum 18 a Platinum unit with an SEER of 18.
The model Platinum 20 is the brand’s most expensive unit, counting installation costs. But that high price tag comes with an all-round feature that makes it the most efficient.
The Platinum 13, on the other hand, is the least efficient with an SEER of just 13. All American Standard units are certified for Energy Star. This means that the units are all approved by the government for their efficiency in using energy.
The Silver XI heat pump is one of the cheapest American Standard’s units. It is offered in a capacity range of 1.5 to 5 ton. Different tons feature different process. The SEER rating of this series is marked at 14 while its HSPF rating is of 9.2. It is also rated for Energy Star for its ability to provide maximum comfort and efficiency.
The Platinum 16 model comes with a 2 stage heating system, resulting in maximum comfort for users. Similar to other units manufactured by American Standard, these models also performs without noise, making it a perfect addition to a home.
If you are looking to buy a unit with great affordability, this one is a great option to choose. It has an SEER of 19 and an HSPF rating of 9.2. As such, it is quite efficient in energy use and can help you save energy bills significantly and considerably.
American-Standard Heat Pumps Prices By Model
American Standard heat pumps are offered in a variety of models. A baseline price list is then required to help form a comparison that is both objective and equal so that you can make a sound decision about which one you should purchase by the end of the day.
Each model of American Standard heat pump is provided and sold with a programmable heat pump thermostat control, an air handler of 1300-1400 cfm, and an outdoor condenser of 3-ton size. Keep in mind that the comparison is made with the price of all heat pump units being divided based on whether or not a system is installed.
The Platinum 20 model is the most expensive heat pump of them all, offered at a price of $4,540 for a system-only option and $10,500 if you want it with its system installed.
If you want a Platinum 18 model complete with its installed system, you will have to pay for $9,300 while its system-only variant comes at a price of about $3,745.
You will have to fish some $8,775 out of your wallet to get a Gold 17 heat pump model with its system installed while that number will drop and become $3,355 for the system-only option.
The price of a Silver 16 heat pump model would be $7,750 with its system installed and it would be about $2,790 for system only. A system-only variant of Silver 15 heat pump model costs you $2,450 if you choose the system-only and $7,090 if you choose it with its system installed.
To get a Silver 14 heat pump model, the cheapest of them all, with its system installed, you will have to pay for $6,475 and if you choose the model with its system only, you will have to pay for at least $2,055.
American-Standard Heat Pumps Prices By Sizes
A “Manual J” calculation will be performed by a contractor prior to installation of a heat pump in order that they can get a precise size. There will be some factors to take in including the types & directions of the windows, the amount of insulation, and the location of your home. Following the calculation, the size of the right heat pump units to install will range from 1,5 to 5.0 ton
Each American Standard heat pump is offered with a programmable thermostat, an air handler of 1300 to 1400 cfm, and an American Standard outdoor condenser of 3 ton and an SEER of 16.
A home that ranges from 600 to 1000 sf can be supplied with a 1.5-ton heat pump, at $2,040 for system only and $6,500 with system installed.
A home within a range of 1001 to 1300 sf can be supported by a heat pump size of 2 ton. This will cost you $2,250 for the system-only variant and $7,050 with system installed.
If the house you own is within a range of size of 1301 to 1600 sf, a heat pump of 2.5 ton should be sufficient. A heat pump of this size is priced at $2,450 for the system-only option and $7,470 with its system installed.
A 3-ton heat pump should be enough for a home ranging from 1601 to 1900 sf, at $2,750 (system only) or $7,750 (system installed).
Paying $3,360 will give you a system-only 3.5-ton heat pump while $8,090 will get you the same size with system installed. This will fit a home in a range of 1901-2200 sf.
A 4-ton heat pump can fit a home size ranging from 2201 to 2600 sf, at $3,450 or $8,470 (system only and system installed, respectively).
A 5-ton heat pump will be the most expensive at $3,860 for system only and $9,390 with system installed. A heat pump of this size can satisfy a home size range of 2601-3200 sf.
In terms of equipment used for improvement of indoor comfort, Lennox is one of the best companies that manufacture them out there. Lennox has implemented many features in order that they can put out products that are efficient in their use of energy and at the same time the company works on making their equipment the quietest on the market. As a result, some of the heat pumps in their lines have a noise level lower than modern refrigerators.
Twice in a row, Lennox had received the Energy Star certification for being the most efficient in energy use, in 2012 and 2013. This serves as a proof of how efficient their products work. Upon receiving this certification, Lennox’s heat pumps were deemed the most efficient on earth ever. What makes Lennox unique is the fact that they supply solar-powered heat pump. Using only the power given by the sun, users can control the indoor climate of their home basically for free
Users can even maintain the level of molding existing in their home as well. As a result, the level of breathability of the air within their home can be improved very well. But you might want some lennox heat pump, prices, reviews to help make a decision.
Lennox Heat Pump Features, Pros And Cons
Lennox heat pumps have an efficiency rating within a range of 13 SEER 7.7 HSPF to 23.5 SEER 10.2 HSPF. Most customers are impressed with Lennox heat pumps for their reliability.
Some even claim that Lennox heat pumps do not require too much maintenance and that their utility bills have also dropped significantly after using this heat pump. Customers are also impressed with the inclusion of solar panel, which is unique only to Lennox.
Lennox heat pumps feature dual-fuel capability. This capability is applicable for gas furnaces that provide back-up heating when needed. Their diagnostic control boards are advanced enough to help you reduce downtime and makes for easy troubleshooting for the unit itself. With the presence of the Humiditrol system, their heat pumps offer superior control over humidity. This system, however, is only available on select models. Lennox heat pumps use scroll compressor of two-stage type.
The use of this compressor allows users to enjoy any one of two running speeds in order that they can control energy use because it consumes the lowest amounts of energy as well as even lower demand, especially in some of the models.
Lennox heat pumps also use R-410A and there are also economy models that work with single-stage system available for users to choose. There is also a high-pressure safety switch that will help users prevent the unit from working once the pressures reach safe-level maximums. Some models feature a 10-year limited warranty while others are offered with a 10-year limited extended warranty after product registration.
Lennox heat pumps, however, are of premium price. This is reflected by their solar-powered models, specifically. The solar panels are not a built-in feature, making it something you have to purchase, which means you will need to pay more in the process. So, is it worth the value for your money?
According to Lennox, using conventional heat pumps you can save usage of power by 5%-15% each day, which is not really efficient. However, when you use Lennox heat pumps featuring support from solar power, you can reduce energy use by 25% each day, at the very least, including federal and state tax credit.
Some energy companies can even offer a rebate of $2-$5 per watt. The most important things here, in the end, is whether or not you can discover a government support that can help you deduct some of the initial costs. Only then can you decide whether or not the feature in question is worth it.
Another downside of Lennox heat pumps is that their thermostats are proprietary, which leads to another point: It is difficult to find replacement parts for their products. Their parts aren’t interchangeable with other heat pumps, making those parts exclusive to Lennox brand only.
The brand also upgrades itself constantly. Some customers even go so far as buying a new unit because they can’t find parts for their old Lennox heat pump, which is frustrating because sometimes the old one simply requires as little as replacing the smallest part of it.
Lennox Heat Pump Model Analysis
There are currently 3 models in Lennox HVAC line: Merit, Elite, and Signature. These three models are comprised of heat pumps, air conditioners, and gas and oil furnaces.
Lennox gas furnaces are offered in a variety of options in efficiencies, stages, and speeds and all have efficiency ratings within a range of AFUE percentage of 80 to 98.7%. Their oil furnaces are offered in two models: SLO18V and ELO183.
Lennox air conditioners are offered with an SEER as high as of 26. Their air conditioners are high-end options and are claimed as exceptionally quiet in their operation. Lennox also offers some models with ductless systems.
The Merit series are perhaps the most affordable one in Lennox line of products. The units under this series are offered with an SEER of 14 and an HSPF of 8.2. The Elite series is of mid-level entry in terms of price. It boasts an SEER that ranges from 14 to 20 and an HSPF that ranges from 9.5 to 10.
The Elite series is offered in two options to choose from: a single-stage and a two-stage compressor. The Signature series is perhaps the highest in terms of price. This makes sense because this series offers users comfort levels that are exceptional and is highly efficient in their use of energy. This series is also the most quiet and comes with an SEER of 23.5 and an HSPF of 10.5. Solar panels can be attached to both the XP25 and SL18XP1 models. In doing so, these models can be more efficient in consuming energy, reducing it by at least 50%.
In terms of warranty, the Merit series is offered with warranties of 5-year duration for both compressor and parts, and of 20-year for heat exchanger.
The Elite series has a 5-year warranty for parts, 10-year for compressor, and either 20-year of Limited Lifetime for heat exchanger (for select models). The Signature series has a 10-year warranty for parts, 10-year for compressor, and either 20-year or Limited Lifetime for heat exchanger (for select models).
Lennox Heat Pump Prices By Model
Lennox heat pumps are offered in a variety of models. A baseline price list is then required to help form a comparison that is both objective and equal. Each model is provided with a programmable heat pump thermostat, an air handler of 1300-1500 cfm, and an outdoor condenser of 3-ton size.
Keep in mind that the comparison excludes the Lennox solar panel and the pricing is divided based on whether or not a system is installed.
The Lennox XP25 is offered at a price of $5,540 for a system-only option and $13,900 with system installed. If you want a Lennox XP21 complete with installed system, you will have to pay for $11,150 while its system-only variant comes at a price of $4,645.
You will have to fish some $9,700 out of your wallet to get a Lennox XP20 with its system installed while that number will become $4,250 for the system-only option. The price of a Lennox SL18XP1 would be $9,350 with system installed and $3,590 for system only.
A system-only Lennox XP17 costs you $3,290 if you choose the system-only and $8,950 with its system installed. To get a Lennox XP16 with its system installed, you will have to pay for $8,650 and if you choose it with system only, the price would be $3,050.
You can get a system-only Lennox XP15 after paying $2,810 and you can bring it home with system installed for some $8,290. Meanwhile, with $2,690, you can get a system-only Lennox XP14 and if you pay for $7,105, you can upgrade it with the system installed. For a price of $2,580, you can afford a
Lennox 14HPX for a system-only variant and for some $6,650, you can get one with system installed. Lastly, the Lennox XP13 model is offered at a price of $2,180 for the system-only and $6,150 with system installed.
Lennox Heat Pump Prices By Size
A “Manual J” calculation will be performed by a contractor prior to installation of a heat pump in order that they can get a precise size. There will be some factors to take into accounts including the types and directions of the windows, the amount of insulation, and the location of your home.
Following the calculation, the size of the right heat pump unit to install will range from 1.5 to 5 ton. Each Lennox heat pump is offered with a programmable thermostat, an air handler of 1300-1400 cfm, and a Lennox outdoor condenser of 3 ton.
A home that ranges from 600 to 1000 sf can be supplied with a 1.5-ton heat pump, at $2,350 for system only and $6,650 with system installed.
A home within a range of 1001 to 1300 sf can be supported by a heat pump size of 2 ton. This will cost you $2,510 for the system-only variant and $7,250 with system installed
If the house you own is within a range of size of 1301 to 1600 sf, a heat pump of 2.5 ton should be sufficient. A heat pump of this size is priced at $2,850 for the system-only option and $7,530 with its system installed.
A 3-ton heat pump should be enough for a home ranging from 1601 to 1900 sf, at $2,950 (system only) or $8,150 (system installed).
Paying $3,220 will give you a system-only 3.5-ton heat pump while $8,290 will get you the same size with system installed. This will fit a home in a range of 1901-2200 sf.
A 4-ton heat pump can fit a home size ranging from 2201 to 2600 sf, at $3,550 or $8,770 (system only and system installed, respectively). A 5-ton heat pump will be the most expensive at $3,950 for system only and $9,300 with system installed. A heat pump of this size can satisfy a home size range of 2601-3200 sf.
Still hesitant to install a York heat pump at home? Get to know more about the heat pump that you can install on your dwelling. Yes, heat pump is actually not a luxury item and can be bought by all people. If you think that using a heat pump always costs money, of course you need to explore more what heat pump is like today.
In this article, we will discuss reviews thoroughly the heat pump that can be installed for a private residence or for a house. Also included here will be told to you about the price and the cost of installing the heat pump so that you no longer have to buy it. Heat pump is a facility for bathing.
As the name implies, this tool has a function to heat the water so that it can take a shower of warm water. Heat pump was originally only known as an accommodation facility, especially in cold or mountainous areas. However, at this time everyone can install it at home because the price and cost of installing the heat pump are very cheap.
York Heat Pump Features, Pros and Cons
Heat pump or also called heat pump is a water heater that utilizes the temperature of very hot Freon. The highest temperature of Freon occurs when the Freon has just come out of the compressor. In the performance of heat pumps, the hotter air the more it will be more efficient to suck in the fan. The temperature of the hot outdoor air can heat up environmentally friendly refrigerants inside the evaporator.
After that, through the compressor, the hot refrigerant is pressed so that the temperature gets hotter again. The refrigerant is then circulated to the Heat Exchanger to heat the passing water in the Heat Exchanger.
Yes, it is true that choosing a Heat pump as needed is one of the things that must be considered, because you do not need to worry later if you spend too much for a Heat pump unit. Selection of Heat pumps based on price, quality, and energy source is the benchmark.
This has to do with the development of technology offered by well-known producers to be able to compete as a choice for consumers. For that we have summarized the advantages and disadvantages of Heat pumps for you.
Efficient, heat pump water heaters are more than three times more efficient than conventional electric water heaters, and are twice as efficient as solar water heaters. It is 75% more efficient than electric heater, more efficient by 60% compared to oil boilers, more efficient by 40% compared to solar heater.
Does not depend on the weather. Heat pump water heaters can work in all weather conditions, but are most efficient in hot and humid weather. The higher the ambient air temperature, the higher the heat pump water heater performance will be. Easy Installation, installing a heat pump water heater is very easy and does not require a large area.
The heat pump is placed in a location with good air circulation. Secure, the separation of water and electricity prevents and reduces security risks during use, such as electric shock, fire, explosion and poisoning.
No need to worry about installing this water heater. For homes that are already standing or still under construction, the cost of installing a water heater is not expensive. This is because you can choose the type of water heater that is needed and matches your abilities.
The average installation of a water heater requires only a wall drill, screwdriver and other equipment that is easily prepared. If you have trouble installing it yourself, you can also find water heater installation services and usually the cost is not expensive especially for water heater gas and electricity. Now to find water heater is very easy.
Then for the lack of use of this type of electric heat pump is the cost that you have to spend for the operation of the heat pump unit is quite expensive when compared to other types. Not only that, the availability of hot water is very limited, because you have to adjust the tube you are using.
York Heat Pump Model’s Recommendation
Heat pumps or heating machines are useful for heating ordinary water to heat. With this one machine is useful for heating water or air which will usually be used for washing, bathing and various other functions. There are several types of heat pumps which are usually used for home purposes.
Here are some types of heat pumps based on specifications and types that are suitable for use at home. With the following types of heat pumps, all the house needs to make your home get the best benefits you can get.
The first heat pump device that is usually used at home is an electric water heater. This heat pump serves to heat water. As a water heater, this one tool is usually used in the bathroom. There are many other types of water heaters that are specifically used for high-rise homes, hotels, apartments, hospitals, villas and various other types. For this one type also does not require complicated installation so it is suitable for use in homes.
The second type of heat pump is solar water heater. As the name implies, this heat pump is a water heater by getting energy from the sun’s heat. Basically the function is the same as the other water heating machines, only the difference is that this one device uses solar thermal energy or better known as solar panels. This type of heater is a bit more difficult to use, so it is usually used for offices or for slightly more official places.
The second type of heat pump is gas water heater. Well, if this type of heat pump uses LPG as a source of energy. For its function, it is almost the same as the previous heater, which is to heat water. What distinguishes the type of heater from the first and second is the type of heater that one uses LPG as its energy source. Usually this one type is also a favorite heating machine used for home or for the villa.
Not only that, the heat pump water heater is also one of the other types of heaters. This heat pump has a slightly different working system. This heat pump water heater uses the heat temperature of Freon coming out of the compressor. This type of heater can also be used for homes because this one heating machine has the advantage of saving electricity used.
The electrical energy needed for this heat pump water heater is only 1/3 of the normal requirement. A heating machine that is very useful and saves energy that is suitable for home. We can choose what kind of model from York heat pump that are available on the stores and we can get the SEER information first to have our home needs fulfilled.
York Heat Pump Prices By Model
Speaking about the model prices, there are many models with the price. We are going to have the the types that are three consisted of basic type, standard type and premium type.
Started from the lowest brand and type, it is Aire-Flo that is consisted in basic type and this has price from $985 to $1,500 and this has SEER range for 14 only.
Airtemp also the basic type with range price at $1,035 to $1,650 with SEER range at 14 and 16. Ameristar is the basic type and this unit price at $1,065 to $1,350 with SEER range for 13 and 14.
Payne also the type from basic and it has price range from $1,075 to $2,950 with SEER range from 14 to 17.
DiamonAir is basic type and it has pricerange from $995 to $1,660 with SEER range 14 and 15.
To the standard types, there are Armstrong and Ducane, Amana, Goodman and Daikin, Armstrong Air & Ducane, Heil, Day & Night and Tempstar, York, Luxaire and Coleman, Maytag, etc and Rheem & Ruud.
For you who want the York brand for the heat pum this is including in standard type and it has price range from $1,100 to $3,675. This heat pump is available for 7 models and it has SEER range from 13 to 20.
And then for the premium types, there are American Standard & Trane, Carrier & Bryant and Lennox. These are the premium heat pumps that are available with its premium type and this has price from $1,285 to $4,200 with variants of model and these has SEER range from 14 to 23.5.
From here, you can get the brands with the type classification and you can choose the right one for fulfilling your needs of heat pump. You must suit your cost with the type too.
York Heat Pump Prices By Size
Here, we are talking about the price of York heat pump as its size. the heat pump size has its price depending on the size. the heat pump size also must be suited with the home size. there are two prices that are the system only and system installed.
Started from the tiniest one that is 1.5 ton heat pump size that is suited with 600 to 1000 square feet home size, this has its price for system only at $985 to $1,425 and system installed started from $2,285 to $3,525.
2 ton heat pump size is suitable for 1001 to 1300 square feet with price for system only at $1,100 to $1,950 and system installed at $2,400 to $4,050. 2,5 ton heat pump size must be for 1301 to 1600 square feets home size with system only price at $1,385 to $2,950 and system installed at $2,555 to $4,595.
3 ton heat pump size is available for home size at 1601 to 1900 square feet with price at $1,385 to $2,950 system only and $2,685 to $5,050. 3.5 ton heat pump size is for 1901 to 2200 square feet home size and it has system only price at $1,450 to $3,375 and system installed price at $2,750 to $5,475.
4 ton heat pump size is for 2201 to 2600 square feet home size and the price for system only is $1,535 to $3,735 and the system installed price is at $2,835 to $5,835.
And the biggest one is 5 ton heat pump size with home size suitable at 2601 to 3200 square feet and this has system only price at $1,700 to $4,200 and system installed for $3,000 to $6,300. In this case, you need to have the heat pump for your house that is suited with your home size.