Heat Pump Outside Unit Not Running ?
Nowadays, with advances in technology, human life is made easier by tools that can help us get what we want easily. One of them is daily life in the house. Heat pump is an example of a tool that makes it easy for us to get hot water for our daily activities such as bathing and others.
Some common things that cause hot water heater is one component that does not function properly. In fact, a household-scale water heater only has three main components. These components include, heat elements, thermostats, and relays. Where these components have their respective functions, which are equally vital. Cause, if one is considered to be damaged, of course, because the water heater is not hot.
As a novice user, of course you will be confused if suddenly your water heater is not hot. The good news, in this article I want to share a little knowledge about some of the causes of water heaters are not hot.
Power Related Problems
Power is the source of an electronic object in order to function. For electronic items such as heat pumps, electricity is the main source of power that is most widely used; in fact, almost all products must use electricity as the main power source. If the outside heat pump unit is not functioning properly, there is also the possibility of a problem that occurs from the power used.
Problems can come from main power sources such as electricity. Sometimes the voltage of electricity that goes up and down, together with all electronic objects, allows for damage to electronic objects. To prevent damage and problems with the heat pump resources, we use tools such as stabilizers. By using a stabilizer, we can regulate the electrical voltage to remain stable and not have a major effect on damage caused to electronic objects.
Broken relay causes dysfunction in the heat pump. Almost all electronic devices use relays, this tool has no other function to prevent if at any time a short circuit occurs then this relay will cut off the electric current. So that undesirable things can be avoided.
Relay on the water heater it mean that is located on the power cable. Precisely in the middle of the cable, there is a box, also an indication light, and a kind of button. If the lamp turns off, the relay may also die, causing the water heater to not heat.
Broken or damaged heat element. For electric heat pumps that stick to the main source wall to heat water using elements. As for the water heater that is installed on the tile using two heat sources. That is, during the day that utilizes heat from sunlight. Of course, if this element is damaged, making the water heater is not hot.
The easiest way to check whether this element is broken or not is able to directly provide electric current directly to the element. If it is hot, it means that it is still good and vice versa, if there is no heat at all we can be sure the element is broken. In addition, we can also use a multi-tester with ohm range position. If the needle on the multi-tester shows movement, then the element is still good, and vice versa.
The Thermostat is in Emergency Heat Mode
Thermostats are heat regulators found in many electronic devices used to regulate temperature. As with heat pumps, thermostats are very important to note. Sometimes a lack of attention and regular inspection have an impact on damage that could have been dealt with beforehand. With a thermostat that is maintained properly and periodically, of course there will be no problems that arise in the heat pump that we use. A non-functioning thermostat.
The purpose thermostat is regulating the electric current come in to heat elements. If the water heater tube is hot, thermostat will shut off the electricity. And will send the current to the element back after the level of water heat starts to decrease. In other words, the electric current entering the heat element must go through an intermediate thermostat. So, if the thermostat is broken, of course the element will not work and finally the water heater will not heat.
In addition, with the thermostat overheating the water in the water heater even the data is prevented. So, its function is almost the same as the thermostat on the refrigerator. If the refrigerator to regulate cold temperatures, while the water heater to regulate the level of heat in the water tube.
For water heaters on a household scale, the three factors discussed are often the cause of a non-hot water heater. Because indeed as I said earlier, for the components there are only three here. Except for water heaters where the source of heat uses gas. Which he uses automatic and also LPG.
Factors that cause it is not hot, of course, can be because automatic does not work, LPG runs out, and so forth. Therefore, it is necessary to check directly better to know the problem. When you are running out of your mind in repairing your heat pump unit, you can ask for some services to repair your unit. However, choose the trusted and right one.